-40%
Recognition Systems ID3D-R Handkey - Right hand
$ 79.19
- Description
- Size Guide
Description
Recognition Systems ID3D-R Handkey - Right handDescription
This item is being sold as
“For Parts/Untested”.
Unable to power. Unit does not have keypad or any other accessories/parts. No testing can be completed. Cosmetically in good condition with minor scuffing and scrapes.
What’s Included:
1x Recognition Systems ID3D-R Handkey - Right hand
Does not include any additional cables, parts or accessories other than those explicitly mentioned in the listing.
Specifications
POWER REQUIREMENTS
Input Voltage
: 12 TO 14 VDC.
Input Current
: 0.450 Amps Min. - 0.5 Amps Max.
Input Power
: 7 Watts Max.
LOCK and AUXILIARY
Switched 12 VDC at 0.1 Amp maximum for operating a control
relay or low current actuation device. RSI recommends the use
of an isolation relay for this application
ALARM MONITORING CIRCUITS
Door switch, Auxiliary Input circuit, and Tamper. 0.5 Ma.
Current loops. Breaking circuit produces alarm.
COMMUNICATION PORTS
Two serial ports
:
CH-0
: RS-422 or RS-485
CH-1
: RS-232 (Printer only)
IDENTIFICATION NUMBER INPUT DEVICE
(not included)
A keypad for ID number entry is built in. Wiegand and magnetic
stripe card reader inputs are also available.
ID NUMBER SIZE
:
ID numbers may be 1 to 10 digits in length.
WIEGAND OUTPUT
Wiegand compatible output is available for host system
interface. Upon verification of identity, the entered ID number
along with the site code, is transmitted in 26-bit Wiegand with 8
bit site code format to the optional Wiegand compatible host.
Other formats and magnetic stripe (ABA/ANSI track 2)
compatible outputs are also available in a +5VDC = data high
or a 0VDC = data high format.
STANDARD WIEGAND FORMAT
A 26-bit Wiegand format is standard. The first bit transmitted or
received is even parity over the next 12 bits. The last bit is odd
parity over the preceding 12 bits. The 2nd through 9th bits are
the assigned facility code with the 2nd bit most significant. The
10th through 25th bits are the ID number entered at the keypad,
with the 10th bit most significant. The card reader emulation
port transmits Wiegand data with a pulse width of 100
microseconds and an interpulse period of 1200 microseconds.
Other code formats can easily be accommodated, but the
factory must be consulted first.
MEMORY CAPACITY
Memory is available to store hand data for a minimum of 256
users. This is expandable to 3,328 or 9,728 or 27,904 users.
Transaction data log buffering is also available for networked
systems. Up to 3,405 transactions are buffered in a fifo buffer
until transmission of stored data is requested by the host
computer.
REQUEST TO EXIT INPUT
A Request to Exit switch or keypad (KP-103) may be
connected for secure side exit.
HANDKEY SIZE
6.50 in. (16.5cm) Wide
8.38 in. (21.3cm) High
7.38 in. (18.7cm) Deep
OPERATING TEMPERATURE
: 32 to 110F. Limited by platen
temperature.
RELATIVE HUMIDITY
: 95% Max. Non-condensing.
HAND READ AND VERIFICATION TIME
: Less than 2 seconds.
THROUGHPUT
: 15 per minute.
VERIFICATION THRESHOLD
:
User programmable on system and individual user basis.
AUXILIARY ALARM CONDITIONS
: User programmable.
Payment
Payment via PayPal is expected within 2-days after the winning bid.We only accept bids from US bidders with confirmed PayPal addresses and only accept PayPal as the form of payment.
Returns
Returns are not accepted for items listed as For Parts/Not Working
Please review all photos carefully as they are part of the description per eBay policy.
Shipping
ARG-Tech directly only ships to the United States. All international shipments are processed through eBay's Global Shipping Program.
We take pride in packing items carefully to ensure safe arrival. We ship promptly, usually same or next day after PayPal confirmation.
We offer combined shipping for customers who purchase more than one item from us at a time. If two items cannot be safely packaged together we reserve the right to ship them separately.
If you have any special requirements or questions regarding shipping, please contact us before buying.
Our business hours are Monday – Friday 7AM-4:30PM EST
Thanks for viewing!
Please check out our other items!